| MODEL |
|
DESCRIPTION |
| Model
9353-FANOUT-P |
 |
Fan-out Cable for the 9353
9-pin D Connector. Converts the
9-pin D connector on a model 9353 to one standard ORTEC
9-pin D preamplifier power connector
and 4 BNC connectors for the Stop Gate Input, Enable Acquisition
Gate, and the Tag Inputs |
| Model
MCS-PCI-OPT2-P |
 |
This cable converts the
25-pin D connector on the
MCS-PCI-P into a separate BNC cable connection
for each input and output signal. This option is strongly
recommended. |
| Models
400A-P, 400B-P and 400C-P |
 |
Available in three
standard NIM widths, single, double, and triple (400A, 400B, and
400C, respectively), these empty modules offer the OEM system
builder the option of packaging special-purpose electronics in a
standard configuration. They are shipped fully assembled, and each
one is provided with 10 connector pins that are prewired with
254 mm (10") leads for easy integration with the OEM
user's electronics. A NIM Bin and power supply will be needed in
addition |
| Model C25
BNC-BNC Signal Cables |
 |
BNC Plug - RG-58A/U - BNC
Plug cables with 50 W
characteristic impedance available in five lengths:
Model C-25-1: 300 mm (1')
Model C-25-2: 610 mm (2')
Model C-25-4: 1.2 m (4')
Model C-25-8: 2.4 m (8')
Model C-25-12: 3.7 m (12') |
| Model LL174
LEMO-LEMO Signal Cables |
 |
LEMO Plug - RG-174 - LEMO
Plug cables with 50 W
characteristic impedance available in five lengths:
Model LL174-0: 100 mm
Model LL174-1: 250 mm
Model LL174-2: 500 mm
Model LL174-3: 1 m
Model LL174-4: 2 m
|
| Model SMA58
SMA-SMA Signal Cables |
 |
SMA Plug - RG-58U - SMA
Plug cables with 50 W
characteristic impedance available in three lengths:
Model SMA58-0.15: 150 mm
Model SMA58-0.5: 500 mm
Model SMA58-1.5: 1.5 m |
| Model
C-VT120-P Power Cable |
 |
Power Cable Assembly for
VT120-P series preamplifiers, 3 m (10') length |
is
a trademark of AMETEK, Inc.